Products

Believe in the power of brands

Stainless Steel - Grade 304 (UNS S30400)

Topics Covered

Contact Supplier

Properties Stainless Steel - Grade 304 (UNS S30400)

28 rows · 304 is the standard "18/8" stainless steel, as well as being the most widely used and …

Composition Fe/<.08C/17.5-20Cr/8-11Ni/<2Mn/<1Si/<.045P/<.03S

Contact Supplier

Type 304 and 304L Stainless Steel Explained - The Balance

Jan 25, 2019 · 304 Stainless Physical Properties Density 0.803g/cm3. Electrical resistivity 72 microhm-cm (20C) Specific Heat 0.50 kJ/kg-K (0-100°C) Thermal conductivity 16.2 W/m-k (100°C) Modulus of Elasticity (MPa) 193 x 103 in tension. Melting Range 2550-2650°F (1399-1454°C)

Contact Supplier

Density of Steel - The Physics Factbook - Hypertextbook

Density of Steel. (Specific gravity or relative density is the ratio of a material's density to that of water.) Stainless steels are the most dense, coming in at 8000 kg/m 3. Though the densities vary, the density of steel is about 7700 kg/m 3. The density of steel are measured in g/cm 3 , kg/m 3 , kg/L and lb/f 3,...

Contact Supplier

Grade AISI 304 Stainless Steel Properties Composition SS ...

AISI 304 Introduction. AISI 304 stainless steel is the most common material in stainless steel. Because SS 304 contains 18% chromium (Cr) and 8% nickel (Ni), it is also known as 18/8 stainless steel.

Author World Steel

Contact Supplier

Stainless Steel ALLOY 304/304L – UNS S30400 / S304033 ...

Alloy 304 a T-300 series stainless steel austenitic, which has a minimum of 18% chromium and 8% nickel. Type 304 has a maximum carbon of 0.07% . It is the standard “18/8 stainless” that is commonly found in pans and cooking tools.

Contact Supplier

Density of 304 Stainless Steel

304 /304l Stainless Steel Data Sheet - AK Steel. AK Steel produces Type 304 Stainless Types 304 and 304L Stainless. Steels are covered by the following specifications Type 304 Density, 0.29 lbs/in3.

Contact Supplier

Stainless Steel - Grade 304 - dm-consultancy

Grade 304 is the standard "18/8" stainless; it is the most versatile and most widely used stainless steel, available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics.

Contact Supplier

Stainless Steel Density - Calculation Methods of Stainless ...

Stainless Steel Density Calculation Methods Stainless steel is an alloy, chemical composition and content diversity change, no one can accurately say that the density of one grade. Especially do machining to the budget, the most difficult to accurate, is stainless steel material is calculated, it is often difficult to calculate a precise results, this is mainly because the stainless steel ...

Contact Supplier

What Is the Density of Stainless Steel? Reference

The density of stainless steel is 8,000 kilograms per cubic meter. Density is calculated by dividing the mass of the material by the volume. Keep Learning.

Contact Supplier

Stainless Steel ALLOY 304/304L – UNS S30400 / S304033 ...

General Properties. Alloy 304 a T-300 series stainless steel austenitic, which has a minimum of 18% chromium and 8% nickel. Type 304 has a maximum carbon of 0.07% . It is the standard “18/8 stainless” that is commonly found in pans and cooking tools. Alloy 304 is the most versatile and widely used alloy in the stainless steel family.

Contact Supplier

304 Stainless Steel Properties EngineeringClicks

The most common type of 304 stainless steel is the 18/8 or 18-8 steel, which constitutes 18% chromium and 8% nickel. Additionally, it contains about 2% manganese, 0.1% nitrogen, 0.03% sulphur, 0.08% carbon, 0.75% silicon and 0.045% phosphorous. 304 stainless steel is …

Contact Supplier

What is the density of stainless steel 304 per pounds by ...

304 is the most common stainless steel so it is very much likely to be used in commercial kitchens. It has good weldability and therefore is likely to be used for commercial and industrial kitchens.

Contact Supplier

303 vs 304 Stainless Steel Properties Comparison Which Is ...

303 vs 304 stainless steel for mechanical properties? Now we start to see some differences. First, the machinability factor. Type 303 is a free-cutting material. The addition of sulfur or selenium to its makeup gives it the best machinability of any austenitic stainless …

Contact Supplier

Density of Ss304 - stainless steel sheets suppliers in China

300 Series Stainless Steel Alloys - 302, 304, 316. PHYSICAL PROPERTIES(ANNEALED CONDITION) Modulus of Elasticity in tension psi 28.0 x 10(6) Density(lbs./cu) …

Contact Supplier

301, 302, and 304 Stainless Steel Metal Properties

Here are the physical and chemical properties of the 301, 302, and 304 stainless steel that we regularly stock - including the free bend requirements for each alloy.

Contact Supplier

Stainless Steel 304 - Lenntech

Type 304 stainless steel is a T 300 Series Stainless Steel austenitic. It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon.

Contact Supplier

STAINLESS STEEL - AK Steel Holding

304/304L STAINLESS STEEL 1 Type 304 Stainless Steel is a variation of the base 18-8 grade, with a higher chromium and lower carbon content. The lower carbon content minimizes chromium carbide precipitation due to welding and its susceptibility to intergranular corrosion. In some instances Type 304 can be used in the "as-welded" condition.

Contact Supplier

What is the density of SS 304 grade SS - answers

The major differences between 202 and 304 stainless steels are in the nickel and chromium contents. 202 has 16-18% chromium and 0.5-4.0% nickel, whilst 304 has 18-20% chromium and 8-10.5% nickel.

Contact Supplier

Stainless Steel ALLOY 304/304L – UNS S30400 / S304033 ...

Alloy 304L a T-300 series stainless steel austenitic, which has a minimum of 18% chromium and 8% nickel. Type 304L has a carbon maximum is 0.030. It is the standard “18/8 stainless” that is commonly found in pans and cooking tools.

Contact Supplier

DENSITY OF STEEL - ameswebfo

DENSITY OF STEEL. The density of steel is in the range of 7.75 and 8.05 g/cm 3 (7750 and 8050 kg/m 3 or 0.280 and 0.291 lb/in 3).The theoretical density of mild steel (low-carbon steel) is about 7.87 g/cm 3 (0.284 lb/in 3).. Density of carbon steels, alloy steels, tool steels and stainless steels are shown below in g/cm 3, kg/m 3 and lb/in 3.

Contact Supplier

304 vs 316 Stainless Steel Metal Casting Blog

304 stainless steel is the most common form of stainless steel used around the world, largely due to its excellent corrosion resistance and value. It contains between 16 and 24 percent chromium and up to 35 percent nickel, as well as small amounts of carbon and manganese.

Contact Supplier

304/304L Stainless Steel Flat Rolled Metal Supplier ...

Type 304 stainless steel is the most common austenitic chromium-nickel stainless steel and is a variation of the classic 18-8 stainless. Its properties provide corrosion resistance to a wide range of atmospheric, chemical, textile, petroleum, and food industry exposures. Type 304L is an extra low-carbon variation of Type 304.

Contact Supplier

Stainless Steel Grade Datasheets

Stainless Steel Datasheets Revised November 2011 Page 1 of 1 atlassteels.au Austenitic Stainless Steels 301, 301L, 301LN High strength for roll formed structural components 302HQ Low work hardening rate grade for cold heading fasteners 303, 303Se Free-machining bar grades 304, 304L, 304H Standard 18/8 grades 310, 310S, 310H High temperature resistant grades

Contact Supplier